MRC Roadsafe 4x4 RP-PAT62 Nissan Patrol Y62 Recovery Points 5T WLL

In Stock

Calculate Shipping

Free Shipping Australia Wide. Courier used will depend on products and location. Sorry no PO Boxes.
Carbon offset freight - $2.00
100% carbon neutral freight to your door. Sendle couriers will be used to send your parcel which may take an extra 1-2 days. Sorry no PO Boxes.

MRC Roadsafe 4x4 RP-PAT62 Nissan Patrol Y62 Recovery Points 5T WLL


Please note:

Included is a pair of genuine Roadsafe recovery points, powder coated bright yellow.

The RP-PAT62 points have been designed for fitment on a vehicle with factory standard bumper. 

If a Bull Bar is fitted modifications might be required to the bar bracket, and/or additional hardware might be required (longer bolts etc.) to facilitate fitment. 


Kit includes:

  • 6 x washers 12mm ID, 25mm OD x 3mm thick 
  • 2 x 12mm bolts x 140mm long 
  • 2 x washers 18mm ID, 40mm OD x 3mm thick 
  • 4 x 12mm bolts x 50mm long flanged head 
  • 2 x 12mm bolts x 65mm long hex head 
  • 6 x Spring washers 12mm 
  • 2 x 12mm nyloc nuts 
  • 2 x 18mm nyloc nuts 
  • 2 x washers 12mm ID, 36 OD x 4mm thick
  •  2 x captive nut side plates 
  • 2 x pin bolt 18 x 1.5 2 x front chassis plates 
  • 50 x 125 x 10 2 x spacer plate 87 x 45 x 6 
  • 2x spacer plate 87 x 45 x 4 1 x LH recovery point 
  • 1 x RH recovery point 




There is much confusion amongst 4WD’ers regarding tow points. Unfortunately, this has been exacerbated because many modern vehicles are fitted with generic tow points.

Generic tow points are not vehicle specific, and while rated to 10,000lbs (4.5t) or similar, mounting them is often done by the vehicle owner, who is not in a position to ascertain whether the mounting location can handle the loads exerted during a recovery.

Depending upon how and where these points are mounted, generic style tow points can be unsuitable for recovery situations, and have been seen to fail during recovery operations.


 A well designed set of tow points will have 5 key points that make them worth the investment for you, and bystanders during recovery situations. 

These being:

  •  They bolt straight on to specific existing chassis holes with no chassis modifications required.

  •  Manufactured in High Quality Australian Steel.

  •  Include High Quality stamped rated bolts (grade 8.8 or higher). 

  •  NATA Approved Testing to determine working load limit – and stamp rated WLL. 

  •  Batch coded for testing and traceability. 



Brand Roadsafe
Shipping Weight 5.0000kg
Shipping Width 0.300m
Shipping Height 0.080m
Shipping Length 0.300m
Shipping Cubic 0.007200000m3

Be The First To Review This Product!

Help other MRC Performance users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category