MRC Roadsafe 4x4 RP-RAN01 Ford PJ PK Ranger Mazda GEN-1 07-11 Recovery Points 5T WLL

Pair of extended length load rated tow points to suit Gen one PK Ford ranger and BT50 

Rated to WLL 5000KG for use with 4.75t Bow shackle.

Designed for use with standard and factory bull bars. (some bull bars may require modification)*

Minimal effect on approach angle.

Retains maximum ground clearance.

Recovery eye 18mm thick steel plate.

Powder-coated in durable yellow powder coat 

Kit includes

Left and right tow points
2 x bolts 
4 x Nylocs
24 x Washers
2 x Spacer tubes
 

There is much confusion amongst 4WD’ers regarding tow points. Unfortunately, this has been exacerbated because many modern vehicles are fitted with generic tow points.

Generic tow points are not vehicle specific, and while rated to 10,000lbs (4.5t) or similar, mounting them is often done by the vehicle owner, who is not in a position to ascertain whether the mounting location can handle the loads exerted during a recovery.

Depending upon how and where these points are mounted, generic style tow points can be unsuitable for recovery situations, and have been seen to fail during recovery operations.

 A well designed set of tow points will have 5 key points that make them worth the investment for you, and bystanders during recovery situations. 

These being:

•  They bolt straight on to specific existing chassis holes with no chassis modifications required.

•  Manufactured in High Quality Australian Steel.

•  Include High Quality stamped rated bolts (grade 8.8 or higher). 

•  NATA Approved Testing to determine working load limit – and stamp rated WLL. 

•  Batch coded for testing and traceability.